COMPONENT PACKAGES

TO-PMOD-7 Component Package

Article by:
Date Published:
Last Modified:

Overview

NameTransistor Outline Power Module 7
SynonymsTZA07A (Texas Instruments)
Variantsn/a
Similar Ton/a
MountingSMD
Pin Count7
Pitch1.27mm (between the six pins, excluding the pad)
SolderabilityEasy to solder by hand, with a powerful soldering iron (the pad is the hardest part).
Thermal Resistance
  • \(T_{JC} = 1.9^{\circ}{\rm C}/W\)
  • \(T_{JA} = 16^{\circ}{\rm C}/W\) (with the recommended land pattern)
Land Area\(10.16x13.77mm = 140mm^2\)
Height4.57mm
3D Models

TO-PMOD 7 Pin Package

Common UsesDC/DC power modules (e.g. buck, boost, buck/boost).

Comments

This is a rather large SMD package with good heat sinking ability. Texas Instruments uses this package for some of their DC/DC power modules, which have built in shielded inductors.

3D Renders

A 3D render of the TO-PMOD-7 component package.

A 3D render of the TO-PMOD-7 component package.

A 3D model of the TO-PMOD-7 package.

A 3D model of the TO-PMOD-7 package.

The dimensions and recommended land pattern for the TO-PMOD-7 component package. Image from http://www.ti.com/.

The dimensions and recommended land pattern for the TO-PMOD-7 component package. Image from http://www.ti.com/.


Authors

Geoffrey Hunter

Dude making stuff.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License .

Related Content:

Tags

comments powered by Disqus