BLUETOOTH

BLE112/BLE113 Design Guide

Article by:
Date Published:
Last Modified:

UART And USB

The UART and USB peripherals onboard the BLE113 module use the concept of endpoints. That is, there are different pin configurations available for each UART or USB module, and the specific one in use is called the endpoint (similar to how many microcontrollers work).

The endpoints can be configured in the hardware.xml file, which has to be programmed onto the module. You cannot use OTA programming to do this.

Over-The-Air (OTA) Programming

The BLE113 module supports OTA programming for a limited number of sections in the device.


Authors

Geoffrey Hunter

Dude making stuff.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License .

Tags

    comments powered by Disqus